Topic · Kitchen Remodeling
Full and small kitchen remodel scopes, islands and open-concept load-bearing checks under the Florida Building Code, cabinet-counter-flooring sequencing, backsplash and lighting detailing.
23 articles published in this topic · updated weekly.
Kitchen RemodelingHow-To··10 min read
A 2cm slab cantilevers about 6 in; a 3cm slab 10-12 in. Past that you add brackets or corbels. Here is the fabricator math, the 1/3 rule, and the seam detail that keeps seating counters from cracking.
All Kitchen Remodeling Articles
Sorted newest first. Each article links downstream to the relevant Pro Work Flooring service pages and to other articles in the same cluster.
Tile is waterproof at the tile but the grout is porous; LVP is waterproof plank-to-plank but rides the slab. Here is how porcelain and rigid-core vinyl compare in a Florida kitchen, spec by spec.
11 min readRead →
An island needs a 42-48 in walkway on all four sides; a peninsula needs three because one end is anchored. That difference, plus the FBC permit fork, decides which fits a Florida floor plan.
10 min readRead →
Inland kitchens fight humidity. Coastal kitchens fight humidity and chloride at once. Here is the material logic — nonporous quartz, a plywood box, and 316 stainless hardware — that beats both.
10 min readRead →
Before the sledgehammer: how to tell a load-bearing or shear wall from a partition, why Florida wind-load design makes some walls structural, and the engineered-beam, permit, and inspection sequence.
10 min readRead →
Three layouts, one rulebook: the NKBA work triangle and aisle clearances decide which of galley, L-shaped, or U-shaped actually fits a compact Florida condo or ranch kitchen.
11 min readRead →
A backsplash is low-abrasion but high-splash, so in Florida the choice is cleanability and grout behavior behind the range and sink. Porcelain, glass, and stone compared by spec, with grout and sealing.
9 min readRead →
The mounting choice is not about looks — your countertop material gates it. Here is why an undermount needs stone or quartz, whether they leak, and which sink is easier to clean in a humid Florida kitchen.
10 min readRead →
Galley efficiency, a peninsula where an island will not fit, and tall storage — plus the HOA architectural review and permit layer that a Florida high-rise adds to every small-kitchen remodel.
10 min readRead →
Two 20-amp circuits, GFCI within six feet of the sink, an outlet every four feet of counter, AFCI, and the refrigerator circuit — Florida's kitchen wiring rules, decoded from the code the inspector actually enforces.
12 min readRead →
Plywood, particleboard, and MDF behave very differently when Florida humidity gets into a cabinet box. Here is how the three substrates rank by moisture resistance, and why the edge band decides longevity.
11 min readRead →
A range hood that moves more than 400 CFM can depressurize a tight Florida house and backdraft a gas water heater. Here is exactly when code makes you add balanced makeup air.
10 min readRead →
How much CFM your range hood needs in Florida: width with 3 in of overhang, 1 CFM per 100 BTU for gas, and why crossing 400 CFM triggers a mandatory makeup-air system.
10 min readRead →
A Pro Work Flooring project manager reviews your details and replies in 5 minutes during business hours. Free in-home estimate. Flooring, tile, and full-service remodeling — statewide across Florida.
Free Callback · Statewide Florida
Tell us about the project. A real Pro Work Flooring project manager — not a bot — picks up the phone in 5 minutes during business hours. No pitch, no pressure.